43 lines
2.3 KiB
Markdown
43 lines
2.3 KiB
Markdown
|
---
|
||
|
|
creation date: 2022-01-08
|
||
|
|
tags: [note,linux,disk,archlinux]
|
||
|
|
---
|
||
|
|
|
||
|
|
## Setting ext4 commit frequency to 60
|
||
|
|
|
||
|
|
Arch Wiki reference: https://wiki.archlinux.org/index.php/Ext4#Improving_performance
|
||
|
|
|
||
|
|
Another way to improve performance on not-so-fast SSDs is increasing the ext4 commit frequency from every 5 seconds up to 60. Just add `commit=60` to the mount options for the boot partition in `/etc/fstab`:
|
||
|
|
|
||
|
|
```shell
|
||
|
|
/dev/sda5 / ext4 rw,relatime,commit=60 0 1
|
||
|
|
```
|
||
|
|
|
||
|
|
## OR enable fast commit
|
||
|
|
|
||
|
|
```shell
|
||
|
|
tune2fs -l /dev/nvme0n1p4 | grep features
|
||
|
|
tune2fs -O fast_commit /dev/nvme0n1p4
|
||
|
|
```
|
||
|
|
|
||
|
|
## Maintenance for SSD
|
||
|
|
|
||
|
|
- `systemctl enable --now fstrim.timer` to trim SSD weekly
|
||
|
|
|
||
|
|
## Using the BFQ scheduler
|
||
|
|
|
||
|
|
Arch Wiki reference: https://wiki.archlinux.org/index.php/Improving_performance#Changing_I/O_scheduler
|
||
|
|
|
||
|
|
Linux notoriously gets very slow with I/O intensive operations such as moving a lot of files at once and swapping. If you have a spinning hard drive or a not-so-fast SSD, the BFQ scheduler can help improve system responsiveness during I/O intensive operations. I still use a SATA SSD for lack of a faster connector on my laptop and I have perceived significantly better overall performance by using the BFQ I/O scheduler. If your boot disk is a fast NVme SSD it's generally not the best idea to use the `bfq` scheduler for it, but since the I/O scheduler is set per-disk, it might be a good idea to use it for any spinning hard disk permanently connected to the computer (e.g. a secondary disk to store games and movies).
|
||
|
|
|
||
|
|
To set the BFQ scheduler, you need to specify some `udev` rules to tell Linux what scheduler to use on what kind of disks. For example, you could use the `mq-deadline` scheduler on your NVme drives and the `bfq` scheduler on your SSDs. I decided to set my rules in such a way that no scheduler is used for NVme SSDs, but `bfq` is used for everything else. To do this, create the file `/etc/udev/rules.d/60-ioschedulers.rules` and fill it in as below:
|
||
|
|
|
||
|
|
```shell
|
||
|
|
# set scheduler for NVMe
|
||
|
|
ACTION=="add|change", KERNEL=="nvme[0-9]*", ATTR{queue/scheduler}="none"
|
||
|
|
# set scheduler for SSD and eMMC
|
||
|
|
ACTION=="add|change", KERNEL=="sd[a-z]|mmcblk[0-9]*", ATTR{queue/rotational}=="0", ATTR{queue/scheduler}="bfq"
|
||
|
|
# set scheduler for rotating disks
|
||
|
|
ACTION=="add|change", KERNEL=="sd[a-z]", ATTR{queue/rotational}=="1", ATTR{queue/scheduler}="bfq"
|
||
|
|
```
|